I was crusing through the Warp and came across the Banewolf done for the 14th Grand Company, a Chaos Traitor website. This is an outstanding treatment of the tank, blood red with a good use of weathering, not too heavy, not too light. What really caught my eye was the green bubble filled glass like tube. I was wondering how to do the chem nozzels on my Banewolves. Leaving metalic just seemed a bit boring. This is most definately one answer.
At the moment the Banewolves are stored elsewhere so, this is more of an aide memior until I can get me, some paint and the Squadron in the asme place at the same time.
Cudos to the folks over at 14th Grand Comany for a lovely BaneWolf!
I kinda sorta finished painting the Ragnarok a while ago. I just never got around to Photographing the thing. Mostly because I never got around to painting the stowage. I painted it using the method described in the Forgeworld Masterclass book for the Artillery peice.
Anyhow, on friday I arrived too late for the game, so camera in hand I shot photos left right and center (But not stowage) of the Ragnarok. So here it is, surrounded by Vostroyans from the CCCLII Firstborne:
Project: Bane Wolf squadron: Part 3 Painting
Posted by CommissarHarris in Bane Wolf, Modelling, Tanks, Work bench
1.0: Camo Base
Codex Grey and Battle grey in stripes
(At this point I chould have done some colour variation mapping)
2.0: Campaign Marking Banners
Mask off the front left panel then Spray a white stripe White with Scab red pinstripe.
(I should have do new the chipping method with hairspray and sand grit.)
3.0: Decals
Red small eagles onto the bannersVehicle numbers; Ammo Storage; Krieg labels
4.0: Chipping using a sponge.
4.1 For the Battle grey stripes, Sponge on codex grey chips across the stripes concentrating on the areas where the crew comes into contact with the hull.
4.2 Then the darker, older chips are sponged on with a mix of 2:1 Scorched brown:Chaos Black.
4.3 Using a brush, join some of the chips
together to make a larger chip. Use Fortress grey to put a thin line below the larger chips to highlight them. Helps create the illusion of peeling or worn paint.
5: Seal with matt spray
(At this point I should have done some selective Filteres with Acrylics to create rain streaks.
6: Rivet filters
6.1 Using Black Oil paints, tin it down with white spirit to a wash. touch a wet brush to the rivet
head and let the surface tension carry it around the rivet. Don't over do it.
6.2 wait for it to dry.
7.0: Hull Rust
Flick Mars Red or Rust Red oild paints onto the hull from an old dry brush. Spray on White spirit to soften and difuse the rust.
8.0: The Tracks
I was going for well used dusty tracks.
8.1 Paint the Tracks a mid-brown colour
8.2 Grind some Graphite and rub it onto the tracks to highlight with metalic.
8.3 Edge highlight with mithril silver
8.4 Go over the Rubber road pads with Vallejo German Panzer grey.
8.5 Dust on 'European dust' and 'Industrial dirt' and fix it by driping on white spirit.
8.6 When it dries dust off the excess.
9.0: Charing on the battle damage
Light airgun spray Chaos black on areas of battle damage
10:0 Stowage
I hate doing stowage. Its one of the last things I do before weathering and I hate it
10: Pipes
Principally a weathering task. Paint with oil paints in a patchy manner with different reds. Dust on weathering powder and fix with white spirit, touched on and allowed to spread.
11: Stubber and Melta
11.2 grind some Graphite and rub it onto the tracks to highlight with metalic.
11.3 Edge highlight with mithril silver
(I should have done somthing more here. perhaps the brown through black sprays for the carbon scoring
on the muzzel would have been better).
12: Lenses
Painted using layering technique. Starting with Chaos Black; Scab red; Blood red; Sunburst yellow. Then a dot of white in the corner furthest away from the yellow highlight.
Using Jascs Paintshop Pro version 8.0
1 Select the Glowing Bars
Open the basic Image. Use free hand select tool to select the rods which will glow:
Promote Selection to Layer
Once the Selection was complete I Promoted the Selection to a new Raster Layer:
Setup the Core
Rename the new Layer to 'Core'. Set the Colour Selector to the bright colour, I use an off white towards green.
With the new colour, select the paintbrush tool. The Necron glass bars on the 'Core' Layer should still beselected. So Select the Core Layer and Paint the new colour into the selection.
Dupicate the Core Layer two more times and set the colour to the Eerie Green Glow.
Selecting each Layer in turn: Paint each layers selections with the new colour.
Adjust the the Gaussian Blur
For each Layer, adjust the Gausian Blur from the tool bar. I often have to play with the values but in general the 'Core' layer is the lowest blur and the upper layers are a higher blur number.
Game VIII - Assault on Outpost Theta 220 from the Death Korps
Posted by CommissarHarris in BatRep, Death Korps, Praxedes IV
I lost the toss and was given the attackers role. Looking at the secenario, I decided to change up my usual list:
- 5 Man Grenadier teams would use Storm Trooper rules
- All Chimeras were dropped from the list
- Leman Russ (Jagd Russ) would be replaced by a Vendetta
- Bane wolves would be un-squadroned
As everything could deep strike I was not going to need Creed - (Kurtz), who is usually there to get the Banewolves outflanking. So out he went to make way for Iron Hand Stracken (Colonel Stahlin). This was going to be a short range assault, making him the obvious choice to lead the 5th Company assault.The was teamed up with a Lascannon (Hind sight - Bad choice); Astropath; Master of the Fleet and Forward Observer (Master of Ordinance); and a body gaurd (I had 15 pts spare).
Elites:
Anything that could Deep Strike Normally was allowed to Assault out of deep strike, so out went the ususal Veteran Grenadiers, in came the Storm trooper Grenadiers. In hindsight I probably should have kept the Veteran Grenadiers, less points per man for basically the same load out, and I didn't end up using the assault option anyway.
Also keeping with the deep strike -Assault, I used Marbo (Watchmaster Steiner). Again being un used to the combo, he deployed by deep strike, too far away to affect anything. Then ran about the board only getting into a combat in turn 4 whereuppon he killed 4 kroot and promptly died in the counter attacks. Bit of a disapointment. My bad though not the rules.
Troops:
Two units of Grenadiers Veterans remauined in the lis, they lost their ususal chimera rides and deployed by deep strike instead. They got to keep their lascannons and in addition were given Demo charges, with woked a treat late game, murdering a Squad of fire warriors who had just tumbled out of a wrecked transport, and half a dozen kroot.
Fast Attack:
Three single unit squadrons of Bane Wolves - These could be deployed by deep strike so I didnt need Creed (Kurtz) to out flank them. The roster aloowed up to 6 fast attack so out went the hated squadroning and they were deployed as individual units. Unfortunately for me two were imobilised in the inevidable face off with the broadsides (who died! muahhahahaha!) and one threw a track on a crater as it entered the board! They were ignored the rest of the game, even though the Multimeltas kept up a punisjhing fire on the Tau vehicles.
Heavy Support:
None!
Game Play:
Guardsmen started dying in droves, then Tau, then more Tau vehicles poped by Meltas and Multimeltas.
Colonel Stahlin and his HQ made it into the crater and took a charge from the Kroot. It looked all over for the Tau with an Imperial win, but in an impressive (and throughly Wilkinson like) set of dice rolls a single Kroot was left in the crater and a dice roll ended the Game. One more turn and theTau troop choices and HQ,s would have been exterminated or at least held out of the crated by Assaults. Overall a Very fun game! and a Win for tyhe Tau, Leaving Billzard Wolf (Tau) in the lead on 3 VPs for the campaign with one each for Death Jester (Necrons) and CommissarHarris (291st Death Korps of Krieg).
Project: Bane Wolf squadron Part 2
Posted by CommissarHarris in Bane Wolf, Modelling, Tanks, Work bench
Part 2: Super Detailing on the First Tank
Assemble the components
Start by assembling the tank from the
kit. I have left the three gun nozzles unattached so I can change the tank model from a bane wolf to a hell hound etc.
Leave the turret base plate unfitted. This will make the adding the lifting hooks on the turret much easier.
Leave the pipe run, the back door and the vats out as well.
Physical scratches and chips
Once the hull and turret are complete, take a scalpel blade and carefully make nicks and scratches and gouges on the hull and turret. I pay special attention to the base of the side plates and the area at the base of the front and back of the tank These are areas that will be bounced off and scuffed by stone, brick re-enforcing trees etc. First the Turret.
Hatches with Hinges and Handles
Drill the turret hatch barrel all the way through with a 0.8mm hole. Fit the hatch into the hatch hole and drill the turret hinges. If it goes well the drill bit will find the hole in the hatch and guide it through to the other side.
Once you've got the hole, cut a length from a paperclip and push it through the hole. Trim to fit. Touch a super glue brush to the sides of the hatch hinge, capillary action will carry the super glue into the hinge.
There would be an inner handle to let the crew pull the hatch shut. I fitted this with a small bit of 0.6mm brass wire, bent as best i could with a pair of pliers.
Turret Casting Number
This Turret is casting run 2-P6. The letters are cut from a games Workshop sprue. I changed up the scalpel blade for a fresh one just for the task. Carefully slice the letter or number off the sprue, trying to take just the number and not any of the surrounding material.
Once all three letters and the dash were cut off, I puddled some plastic cement in my palette and used tweezers to pick up the letter and gently touch the letter to the puddle of cement. Then put them on the turret. I used the butt of the scalpel to push the letter onto the turret. The idea here is to stick the letters on without leaving large glue smears on the turret plastic.
Turret Lifting Hooks
There are three lifting hooks fitted to the turret, two on top at the front and one on the side at the rear.
Lengths were cut from a paper clip and bent over a the neck of a GW sculpting tool to give a small radius U shape, with one short leg and one long leg.
With an 0.8mm bit, drill a hole in the turret where the first hook will go. Push the long leg of the hook into the hole. Mark where the short leg lands, and drill the second hole. Superglue the hook in from the underside of the turret. Repeat for the other two hooks.
Pintle Mount ring
The Pintle mount is mounted on sliding rings rather than fixed to the turret hatch ring. This is made from a 1mm sheet of plasti-card cut into a strip 3mm wide, then glued carefully to the step on the turret hatch ring.
The mounting arms are from the GW tank accessories sprue. A slot is cut into the end of the arm to allow it to slot over the pintle mount ring. The Guns themselves are from the Death Korps Grenadiers special weapons kit. These have been pinned to the Pintle arm in an 'at rest' position.
Then on to the Hull
Hatch Handles and crew access handles
I added a paperclip wire staple (a piece of wire bent into a 'C' shape) to the engine maintenance
hatches on both sides of the vehicle. I also added a smaller staple to the shoulder of the vehicle just above the hatch. The theory is the crew can stand on the engine hatch handle and hold on to the hand hold on the shoulder and swing themselves up.
Fuel Cap All vehicles need em. I have fitted some after market resin
fuel caps to the rear vat cover on the left hand side. The cap hinge was drilled out on one side and a length of 0.5mm rod bent into an "L" shape and pushed into the hinge as a primitive return spring to close the hatch again if a crew member leaves it open. Extra Amour?
Sand Bags?
Not today
Smoke launchers
A smoke launcher comes from the Imperial Guard vehicle Accessory sprue I cut off the ends of the some of the smoke launcher tubes and drilled out the tubes to simulate smoke rounds that have been fired and not yet replaced by the crew.
The Launcher was then fitted to the tank above the Melta cannon. Three 0.5mm have been drilled into the hull and the into the smoke launcher. Telephone exchange wire was used to show the firing wires for each smoke tubes.
Track Guards
Track guards have been fitted in various states of damage to the tanks. Thin the edges that are exposed using a Dremel and needle files.
Remember these are often not much more than pressed tin mudguards, and as such are definitely way too thick for the scale of the model. Carefully thin spots along the length of the mudguards until they are translucent. You can then push holes through the translucent but to simulate the track guards having been damaged by something heavy coming off the tracks in motion.
I also sometimes take off the rivet heads on the banding and drill out where the rivet heads were. Then carefully cut back the fixing strip where it has come away from the track guard.
Battle Damage
Melta /Gauss damage
None today
Laser Damage
None today
Shell Strikes
This Bane wolf has been in action for several years and taken a few hits from High Tech Tau, solid rounds. These have been simulated thusly:
- Take a Brass rod 1.2mm thick heat the end over the Gas hob.
- Find a spot you would like to damage and dig it in and twirl it around a bit.
- Heat the rod again and scratch some lines away from the point of impact.
- Then get the scalpel and randomly cut away wedges from the 'moosh' that squidged away from the poker. You want a rough edged hole with only a little bit of 'moosh' left.
- I also used a Dremel to add a few more gouges radiating away from the hole.
- Unditching Gear (Shovels, Picks Blocks Tackle Chains, Tow Wire, Lumber)
- Personal Gear
- Spare Tracks
Shrapnel Damage, Embedded Shrapnel.
None today
Next time I do a tank...
Headlights
Vision Block guards
Drill out the base plate in line with the earth mover blade, and fit 6mm magnets to both the blade mountings and the hull.
Echoes in the Warp
I Battalion
IIXX Company
On the Workbench
Campaigns
-
-
Vanadian Campaign: Overview13 years ago
-
Turn order and Initiative15 years ago
-
-
Death stalks the Underhive16 years ago
Categories
- 3rd Platoon
- 40k-3e
- 95th Imperial Rifles
- Army LIst
- Army Planning
- Artillery
- AutoCannon
- Background
- Bane Wolf
- BatRep
- Battle Report
- Biel Tan
- Campaign 2
- Campaign Honors
- Campaign ideas
- Chimera
- Command Team
- Commissar
- Corsairs
- Cygurdsin Millitia
- Death Korps
- Decals
- Eldar
- Enemies of the Imperium
- Fire Support Squad
- Grenadiers
- H'Russ Sept
- Heavy Bolter
- Hive Fleet Germanicus
- Hrus Incident
- Hunting Russ
- I Battalion
- Imperial Guard
- Infantry
- Inquisitor
- Invasion of H'Rus
- IX Company
- IXX Company
- Modelling
- Necrons
- Orks
- Painting
- Photography
- Praxedes IV
- Project Earthshaker
- Ragnarok
- Specialists
- Tanks
- Tau
- Tournament
- Tyranids
- Ultima Thule
- Valdor
- Valkyrie
- Vostroyan
- Vulture
- Weathering
- Work bench
- XII Company
- XV Company







