Painting the cargo bay. No 'in progress'es here, just the end result. I have been asked in the comments if I am using the IA:Masterclass as a guide. I am in as much as I use it as a source material for some of the techniques, such as sponging for the chips and the plan for the heat corroded metal colouring for the engine. I am not specifically following the colour schemes. I would argue I will end up (hopefully) closer to the Testors Scale workshop effects on the exterior.
Planning for Painting
I fore-see painting these models taking a long time and being done in many stages, so I think some forward planning might be in order to keep me on track. I have laid out my plan here below for my own reference and I will probably have to up date it as practicalities rear their ugly heads. At the bottom of this post is a list of links to tutorial videos I found on painting using an airbrush. I will be following these quite closely. It is the colour scheme I had in mind anyway (A miss spent youth poring over books on the luftwaffe has obviously left me hopelessly corrupt) so thart was a bonus when I came across the guides.
Assembly:
Assemble the major components:
Undercoat Coat:
Spray Can of Citadael Skull white.
The Cargo bay:
Basecoat VMA: Dark Yellow. Spray all of the inerior and the Inside surface of the doors and the rear cargo hatch.
Mix black VGC:Black and C:Scortched brown (1:2) . Use a sponge to dab the mix lightly to the areas of crew contact. More on the floor less on the walls.
Pick out the buttons in white then paint a layer of green or blue or red on the buttons.
Pick out other details like the stanchions in metalics
Thin AOC: Burnt umber and wash it into the detail on the walls and floor. This adds depth to the detail as well as adding a patina of age to the interior. Once this is dry, add some MIG: European Dust weathering powder to the mix and wash it around the floor.
The Light fittings are oversprayed with thinned VMA: Yellow on the area surrounding the light fittings. This should be very subtle.
The Exterior:
Preshading and base colour
Spray all of the panel ines with Vallajo Model Air Black (Tutorial Part 4b: Painting Techniques: BF109 Preshading).
Apply the Basic hull colours by filling in the middle of each panel towards the outer edge. Then a broad overspray of the same base colour to make the preshading a bit more subtle.:
Side Elevation: VMA: Light Grey
Upper surface: [VMA: Dark Grey]:[VMA: Light Grey] at 3:1
Mottling
For the mottling Use the upper surfcae colour above, but thin to 1:1 pigment to thinners
Squadron Markings Colours:
I masked the Tail aelerons and boom rings and sprayed them VMA:white. Give the white some time to dry and spray the white sections VMA: Yellow.
Tidy Up
Landing Skids - Black and Graphite
The Decals:
Apply the Decals to the last layer of paint! Not after its been Varnished! you muppet (Thats me, not you)!
Engine Cowling:
I am going to go for a heat blasted rust. Start with a base coat of C:Snake Bite Leather. On the rear ring, Paint in C:Chainmail. Add alternate layers of CW: Asuriman Blue and CW: Ball Red across the whole engine cowl. When it starts looking right, wash with thined AOC: Burnt umber and AOC: Black.
Exterior Weathering:
Thin AOC: Burnt umber and wash it into the details. This adds depth to the detail.
Spray VMA: Dark Yellow onto the areas heat damaged by the engine exaust and Laz cannon mounts. The Dark Yellow is thinned with Model Air thinners 2:1 instead of the usual 3:1.
Spray VMA: Black onto the center of the areas heat damaged by the engine exaust. The Black is thinned with Model Air thinners 2:1 instead of the usual 3:1.
The Cockpit Interior
Using this tutorial link as as a guide
Base Coat: Black Grey
Panel Lines/ Stains thinned Black /Brown Mix sprayed
Further Panel line definition by Oil wash of Black/brown
Detailing: Lead pencil to highlight the edges of crew contact areas with a metailic tinge
Orange plastic control surfaces
The Crew:
The crew will be wearing a tan uniform (VMC: Khaki) and green armour plates (VMC: Luftwaffe cam green) with with a white helmet.
For all Vallejo Model Air thin all paints 3 drops colour: 1 Drop Thinner Unless otherwise specified.
Tutorial Index
From Testors Scale Workshop
Full list of Testors Tutorials
Part 1: Introduction
Part 2: Introduction: Tools
Part 3: Introduction: Aribrush
Part 4a: Introduction: Painting
Part 4b: Painting Techniques: BF109 Preshading
Apply a Body Colour to top and sides
Apply an Upper surface Colour
Apply the lower surface Colour
Part 5: Painting Techniques: BF109 Masking
Part 6: Painting Techniques: BF109 Masking Techniques and Mottling
Part 7: Decal Tools and Techniques
Part 8: Compare to Real Thing
Part 9: Panel Line Washes
Interiors: Part 1
Interiors: Part 2
Post Shading: Part 1
Post Shading: Part 2
Chipping and exaust stains
Applying a Flat Coat to a scale model
Applying Future to Clear plastic Parts
Final Report
Building a Flying Stand
Key
VMA: Vallejo Model Air
VMC: Vallejo Model Colour
VGC: Vallejo Game Colour
C: Citadael
AOC: Windsor Newton Artists Oil Colour
CW: Citadel Wash
Constructing the major components
I have finally had some time to build the major components (Yes I fall into the 'Build Paint it as components' school of thought) ready for painting. After having glued the components together however I realised I should have glued the other half of the nose section to the body. This would have allowed me to magentise the weapon mount before painitng, as it is I will have to paint the model to the point I can fit the crew module before glueing on the side panel and fitting the magnet.
The next step will be to paint the interiors on the three hulls at the same time. I will be undercoating the interior with citadael white. Then using my newly aquired airbrush I will be painting the interior a tan base colour.
We played a scenario the other day that forced my army out of its ususal transports, Chimeras (Chugs) and into a Deep striking Flyer goodness mode. I picked one Valkyrie/Vulture for the force as the Anti-Tank component, principally because I only have one Valkyrie model built. I picked up a few forgeworld Resin models years ago, painted and assembled two of them and only one has survived the ravages of the gaming table. So off to the table I went with one of the New Fifth Edition Vendettas in my army list. And it Rocked! It kicked A$$. It took names.
My Tau opposition didn't know what to fire at first, the Three twin linked Las Cannons on the Armour 12 Chassis Vendetta, Or the Three Bane Wolves bearing down on his army full of multi melta goodness! Mmmm confusion in the enemys targeting computer, just what the doctor ordered!
So with the Banewolf's off and kicking Tau around the table top, a squadron of Vendettas seemed a good choice for the next Project.
Part 1: Planning
I'm gonna make me a squadron of three Valkyries. These Valkyries will be operating with the Imperial Navy contingent on Praxedes IV.
Construction will include magnetising the hull and Wing hard points for quick swaps of weapon load outs .
To keep them stylistically the same as the Death Korps they will be painted in a Grey/Dark mottled scheme. I'll be painitng with an airbrush and I have also found a series of painting guides for using an airbrush to paint a Messershimtt ME 109 in a very similar colour scheme to the one I have in mind, so I'll be following that series quite closely.
I hope to use the forgeworld decal sheets for detailing.
What are Valkyires?
What do we know? as usual I'm going to start with a visit to the Librarium Lexicanum. The Valkyrie is a heavily armed airborne armoured assault carrier with VTOL capabilities, used to ferry special forces infantry units such as Storm Trooper Squads and Drop Troop Regiments such as the Elysian Drop Troops to and from combat zones.
The craft has two door mounted Heavy Bolters for door gunners to operate. This combination of weapons allows Valkyrie pilots to stay on station once their cargo has been dropped and provide limited air-support to the troops on the ground. Valkyries carrying extra fuel are capable of carrying modified Drop Sentinel, Cyclops and Sentry Gun instead of troops. In most cases, the Valkyrie, like most of the Imperium's aircraft, is piloted and operated by the Imperial Navy, and are provided in joint operations for use to the Imperial Guard on a need basis.
The Primary modification is reinforced armor with extra armor added to that to reduce the chance of damage and force of heavy weapon impacts. This extra weight reduces the Valkyries max flight altitude and speed, but allows the crew to use it's VTOL capabilities to the maximum potential with improved survivability.
The Vendetta Heavy gunship are Valkyrie's which have been attached to Imperial Guard units and received the increased armor, and then equipped with 3 Twin-Linked Lascannons, and used as a tank hunter after dropping off any unit being transported by it. Further more, it still retains the ability to mount 2 Heavy Bolter door guns. It may also replace the 2 hardpoint mounted Twin-linked lascannons on its wings for 2 Hellfury incendiary missiles instead.
There are ten known patterns being made by seven listed forgeworlds including Lucius, the forgeworld that produces the Number 98 pattern lasgun for the men of Krieg. However the differences between the patterns are not known.
Some Images for reference and Ideas
Echoes in the Warp
I Battalion
IIXX Company
On the Workbench
Campaigns
-
-
Vanadian Campaign: Overview13 years ago
-
Turn order and Initiative15 years ago
-
-
Death stalks the Underhive16 years ago
Categories
- 3rd Platoon
- 40k-3e
- 95th Imperial Rifles
- Army LIst
- Army Planning
- Artillery
- AutoCannon
- Background
- Bane Wolf
- BatRep
- Battle Report
- Biel Tan
- Campaign 2
- Campaign Honors
- Campaign ideas
- Chimera
- Command Team
- Commissar
- Corsairs
- Cygurdsin Millitia
- Death Korps
- Decals
- Eldar
- Enemies of the Imperium
- Fire Support Squad
- Grenadiers
- H'Russ Sept
- Heavy Bolter
- Hive Fleet Germanicus
- Hrus Incident
- Hunting Russ
- I Battalion
- Imperial Guard
- Infantry
- Inquisitor
- Invasion of H'Rus
- IX Company
- IXX Company
- Modelling
- Necrons
- Orks
- Painting
- Photography
- Praxedes IV
- Project Earthshaker
- Ragnarok
- Specialists
- Tanks
- Tau
- Tournament
- Tyranids
- Ultima Thule
- Valdor
- Valkyrie
- Vostroyan
- Vulture
- Weathering
- Work bench
- XII Company
- XV Company
