Project Vulture: Half way there  

Posted by CommissarHarris in ,

A frend of mine has come over and brought his Cannon EOS 500D.  Most of my shots are done using my own, older Cannon EOS 400D with a Macro Lens, so I had to try a few snaps with the new camera as a contrast.
 I thought I'd try a WIP of the Vulture in the new Praxedes IV theater colours, and this is the result.  This camera is very good!  These were taken with the standard 18mm - 55mm lens on autofocus with an appeture setting of F35 and balancing the shutter speed to the available light.

The subject is my WIP vulture in the 291st theater livery for Praxedes IV campaign.  At present its waiting decals and chipping before I get stuck in in with the weathering and filters.

For all Vallejo Model Air thin all paints 3 drops colour: 1 Drop Thinner Unless otherwise specified.

Undercoat Coat:
Spray Can of Citadael Skull white.


The Exterior:
Preshading and base colour
Spray all of the panel ines with Vallejo Model Air Black (Tutorial Part 4b:  Painting Techniques: BF109 Preshading).

Apply the Basic hull colours by filling in the middle of each panel towards the outer edge.
 Top and Side Elevations: 3:1 Vallejo Model Air Sand Yellow to Vallejo Model Air :Ochre
 Belly Elevation: (3:1 Vallejo Model Air Pale Blue

Camoflage
Apply Spots of Vallejo Model Air: Burnt Umber in a random pattern


Squadron Markings Colours:
I masked the boom rings and sprayed them VMA:white.  Give the white some time to dry and mask off the White Sections with Tamiya 10mm Mask.  this leaves a perfect 1 mm strip on either side of the boom rings, I sprayed these VMA: Red to get the red pencil stipes on the outside of the boom.


The Cockpit Interior
Using this tutorial link as as a guide

Base Coat: Black Grey
Panel Lines/ Stains thinned Black /Brown Mix sprayed
Further Panel line definition by Oil wash of Black/brown
Detailing: Lead pencil to highlight the edges of crew contact areas with a metalic tinge

The Crew:
The Crew are a bit stuffed up on this model.  I painted citadael Space Wolves grey on the armour with the intention of using Citadael: Badab Black washes to give the unpainted Iron effect used on the Krieg granadiers.  But it didnt work very well.  The uniforms are VMC: Luftwaffe cam green with with a white helmet.



Key
VMA: Vallejo Model Air
VMC: Vallejo Model Colour
VGC:  Vallejo Game Colour
C: Citadael
AOC: Windsor Newton Artists Oil Colour
CW: Citadel Wash

Saturday gaming  

Posted by CommissarHarris in , ,

Playing at games workshop Bromley today. I played two games from the new battle missions book. I chose 'War of Attrition' and my opponent (Death Jester) chose 'Pre Emptive Strike'. I lost both games. The first game was a close run thing right up until the end two turns. Turn one I smashed all of the Eldar tanks, wiped out the rangers, shattered the bike squadrion and wrecked half the walkers.  At the close of turn 3 every vehicle on the table was a smouldering wreck.  The Bailed out Wriath guard wrecked both of the Vendettas with gunfire and assaults. At the end of the game it was grenadiers vs wraithguard, which is not much of a contest.  My troops ended up cycling onto the board a couple of times each, guaranteeing the Eldar victory.  Without the Bane wolves, getting rid of the Wriath guard was nigh on impossible.
The second game never came together for me. My HQ started the game standing out in the open and was  anihilated with extreme predjudice in the first turn. The banewolves didn't turn up on the board until turn five and even then arrived on the wrong flank. 
My opponent very skillfully arrived at every fire-fight on the board with maximum concentration of his army, usually facing desultory fire from one or two of my units. Both fun games though and I probably learned slot more from the second game than the first.

New Posting  

Posted by CommissarHarris in , ,

The 291st have a new posting!  747.M41 the Regiment arrived on  the world of Praxedes IV, a world under seige.  Tau symparthisers had invited the Tau empire to annexe the world. This had lead to its inclusion as a target for the Damoclese crusade.  With the crusade winding down the 291st, fresh from the withdrawl form the sept world of H'Rus, were redirected to the campaign to retake Praxedes.

Praxedes itself is a brown orb, too close to old father Praxedes to maintain a verdant biosphere, and made up of entirely too much sulphur for full terra-forming.

The Regiment was thrown into the battle almost immediately upon arrival. No time was allowed for theater aclimatisation, or re-equipping for the enviroment.  This saw the regiment fighing its first few encounters in the traditional Krieg black.  It wasn't until after its first 100 days of fighting that units started to be re-equiped with uniforms more fitting for the hot, barren enviroment of Praxedes IV.

In otherwords, I have decided to go for another colour scheme, a desert colour scheme, and to the releif of my wife, a brighter colour scheme.  Fo years she has lamented me "paining things black", so the new buff coats are much better in her opinion.
The method I have chosen it paint these is a hybrid of Airbrush and Brush applied washes.  I've seen a few desert painted Death Korps armies around but it was Ishkurs method that caught my eye the most.  He had some stunning guardsmen up on his site and a very simple recipie for producing them.  He is spraying white basecoat, then , then brush coating them with devlan mud and Grypone Sepia washes to achive some incredible results.
I thought to myself I could do that.  I still wanted a darker finish that he is producing, so I varied the method a little.

So here goes:
1:      Pin any grenades, Packs, democharges or other belt equipment to the body of the Grenadier
2:      Primer the body and arms with Halfords Primer "Grey" Spray

3:      Spray GW Black as an undercoat
4:      Pin the arms to the Grenadier
4b:    Superglue the power cable to the powerpack then using a hair dryer on hot setting, blow dry the power cable until it is soft enough to pull into the slot under the hellguun ans superglue in. 
5:      Using an airbrush, spray ValejoAir: Sea Grey (Much like C: Astronomicon Grey) from a high angle.  this is to try and leave shadowed areas still black
6:      Wash the Steel in CW: Badab Black (4 -5 layers I think)
7:      Wash the Storm coat in CW:Gryphonne Sepia (5-6 layers I think)
8:      Wash the trousers in CW:Devlan mud (2-3 layers I think)
9:      Drybrush the storm-coat with 1:1 C: Snakebite leather and C: Bone White
10:    Paint the leather webbing C:Bestial Brown
11a:  Paint the Face plate of the Gas mask C:Astronomicon Grey wetted out 1:1 with water
11b:  Edge the Steel with White or C:Space Wolves Grey to get the light glinting of points in the armour.
12:    Wet down V:Blood Red and wash it into the eye peices.

And your done.....
I love this method, I lined up 30 Kreig grenadiers all completely assembled and equiped  using step 1 thru 4, then powered through steps 6 thru 9 on all thirty models in one evening.  A few more evenings of detailing where it was needed (powerswords and brass work on the Grenade Launcher ammunition etc) was all that was left and I had 30 New Grenadiers!

Applying this to the Drax Method of Army planning you can see I went from a standing start to my infantry compliment mostly complete!



Next, some Vendettas, This will be like Project Valkyrie Rebooted with Desert Colours.  I did Finish the Squadron of Navy Grey coloured Vendetta's, but Now I want to re do them in a Panzer Yellow colour.

Friday night gaming  

Posted by CommissarHarris in , ,

Another Friday Night game and another attempt at real time blogging uisng the iPhone and email functions.  I'm having to edit this again because once again the post has lost most of the text.  It seems that it chops off any text posted after the first attached photo.  Oh well, next time it'll work....

Game XII: The Shadam AgriComplex 0827-Epsilon
Tau vs Imperial Guard 1500pts

High above Praxedes IV things had just begun to heat up in Port Franxs, while on the planets surface, the war for Praxedes IV continued to rage unabated.  Imperial forces launched a sudden offensive to recapture the ruined Agricombine complex above the river Shadaut.  Cavalry elements of the 291st Death Korps, supported by attached Navy Vendetta's, struck at midday.  The assault was timed to strike just as Old Father Praxedes reached his zenith in the sky.  Three Vendetta's carrying 20 Grenadiers from 15th Company, deployed by wire line jump into the ruined Administratum building and took up positions on the first and second floors.  The Vendetta's having delivered their cargo shot back from the building in order to give long range fire support.





With the arrival of the Necrons, this sector had been quiet for months. The arrival of the 291st in the sector, in their newly issued praxedes summer uniforms, had gone completely un noticed by the Tau. Tau command were caught completely off guard by the sudden stroke. There was little time for planning, they simply had to scramble any available units into the field. The first to respond were a group of Kroot on a patrol through the area.
The Xenos approached from the south directly into the ambush zone outside the by now heavily fortified Administratum building.  They fought bravely and even managed a volley of fire before they were obliterated by fire directed by the Forward observer attached to Captain Fustus, and a hail of lasfire from the Grenadiers.

Tau commander  squad on ready reaction duty shot over the battle field  on a high arc, comming down just behind the Banewolves moving up the right flank to support the Grenadiers.  Tau technomagic allowed them to target a Vendetta with a hail of high energy beams and missiles as they came down. In the cockpit of the Vendetta, , alarms screamed and the consoles of the weapons officer lit up like a Emperor Day tree warning of a target lock.  The pilot reacted immediatly, jinking just in time to avid the worst of the fire, but it left the ship badly placed to return fire.



The Banewolves however, were left with a perfect opportunity.  They slewed around on their treads, and circled the Tau battle suits. Corrosive molecular acids spewed from the turrets of the vehicles, splashing over drones burning through seals and electronics alike, drones and suits alike sparked and burst apart as the acids reduced them.  The Tau commander was soon left standing alone and dragging a lump of mettal where his foot actuators used to be.



The Tau commander jumped from the ring of the Banewolves and fired directly up into the rear of the sill jinking Vendetta. One ion bolt flew true a penetrarted the thin armour of the rear loading door, and continued up through the roof of the vehicle into the Jet engines shatetring the turbines within. The Turbine came appart in an angry burst of parts and smoke, slamming the vehicle into the ground.
but the vicory was short lived and the Banewolves sun again and hosed the commander with fire. His suit was speared by Fusion beams and stubbers, finally comming appart and melting into the rapidly deepening pool of molecular acit.

Outside the back quarter of the Administratum ruins, Tau stealth suits struck from the skies, loosing rapid fire energy beams at the squad sheltering in the rubble. Caught completely off guard, the veterans of 2nd Squad bolted, back towards their own lines, firing as they went. Four stealth suits went down, caught in the hail of fire from the retreating guard. 1st SQuad, still in the rafters turned to pour more fire into them and another was killed, it was enough and the stealth suits broke for their own lines. Then Marbiov emerged from the ruins, and charged the stealth suits. Firing into their backs as he came, they were cut down.


The Tau counter attack had failed, smashed by artillery and demo charges, the Tau fell back in dissarray. The Tau tanks only just arriving, had no-one left to support. Turning back for their own lines, one Tau tank took a pot shot at Marbiov frying him before dissapearing out of view.



Reprise
The old Agricombine complex sat on a hill overlooking a bow in the the river Shadaut. Below it, spread out for miles lay the Tau positions. Within hours of the stuggle to capture it, the Imperium had moved in in force. The artillery opened up all along the line following instructions directed from the combine. Further Tau counterattacks were broken up by precision atillery before they could even get started. Soon the Tau position in the wole sector became untenable, forcing a more general withdrawl.


Imperial Victory!

Friday night Game vs Eldar  

Posted by CommissarHarris

Its friday night and my first friday game of 40K for a while. I have mostly finished painting the Vendetta Squadron, so I thought I'd give them an outing.
The army List was 1 Comand HQ with Creed, two snipers, Medic, and a Plasma rifle, an Astropath and forward observer (Master of the Ordinance); a Leman Russ; a Squadron of three Bane wolves and two squadrons of Vendettas; Carruing 2 Squads of Grenadiers with Demo charges.


Deployment and scout moves went ok right up to the point DeathJester  Stole the initiative.  Still, with a full round of shooting at my Vendettas sitting in his face, Fortuna was not with him and he missed with everything!
By turn four most of the models of both sides were wrecked or removed as casualties.  For me the Vendettas worked great! smashing vehicle after vehicle with Twin Linked laz cannons.  I moved them a little too close though as I was trying to put down troops on the objective too soon and at least one of them was trashed by Asurman in close assault.  Once he had downed it, he ran up and slotted the poor lone Veteran climbing out of the imobilised vehicle, and my last remaining troop choice.
This was origninally posted from a iPhone and I have had to edit it because somthing has been lost in the translation when it was sent :-(

Project: Valkyrie: The Cargo bay  

Posted by CommissarHarris in ,

Painting the cargo bay.  No 'in progress'es here, just the end result.  I have been asked in the comments if I am using the IA:Masterclass as a guide.  I am in as much as I use it as a source material for some of the techniques, such as sponging for the chips and the plan for the heat corroded metal colouring for the engine.  I am not specifically following the colour schemes.  I would argue I will end up (hopefully) closer to the Testors Scale workshop effects on the exterior.








Project Valkyrie: Planning for painting  

Posted by CommissarHarris in ,

Planning for Painting
I fore-see painting these models taking a long time and being done in many stages, so I think some forward planning might be in order to keep me on track. I have laid out my plan here below for my own reference and I will probably have to up date it as practicalities rear their ugly heads. At the bottom of this post is a list of links to tutorial videos I found on painting using an airbrush.  I will be following these quite closely.  It is the colour scheme I had in mind anyway (A miss spent youth poring over books on the luftwaffe  has obviously left me hopelessly corrupt) so thart was a bonus when I came across the guides.


Assembly:
Assemble the major components:



Undercoat Coat:
Spray Can of Citadael Skull white.

The Cargo bay:
Basecoat VMA: Dark Yellow.  Spray all of the inerior and the Inside surface of the doors and the rear cargo hatch.
Mix black VGC:Black and C:Scortched brown (1:2) .  Use a sponge to dab the mix lightly to the areas of crew contact.  More on the floor less on the walls.

Pick out the buttons in white then paint a layer of green or blue or red on the buttons.
Pick out other details like the stanchions in metalics

Thin AOC: Burnt umber and wash it into the detail on the walls and floor. This adds depth to the detail as well as adding a patina of age to the interior. Once this is dry, add some MIG: European Dust weathering powder to the mix and wash it around the floor.

The Light fittings are oversprayed with thinned VMA: Yellow on the area surrounding the light fittings.  This should be very subtle.



The Exterior:
Preshading and base colour
Spray all of the panel ines with Vallajo Model Air Black (Tutorial Part 4b:  Painting Techniques: BF109 Preshading).

Apply the Basic hull colours by filling in the middle of each panel towards the outer edge.  Then a broad overspray of the same base colour to make the preshading a bit more subtle.:

Side Elevation: VMA: Light Grey
Upper surface: [VMA: Dark Grey]:[VMA: Light Grey] at 3:1

Mottling
For the mottling Use the upper surfcae colour above, but thin to 1:1 pigment to thinners

Squadron Markings Colours:
I masked the Tail aelerons and boom rings and sprayed them VMA:white.  Give the white some time to dry and spray the white sections VMA: Yellow.

Tidy Up
Landing Skids - Black and Graphite

The Decals:
Apply the Decals to the last layer of paint!  Not after its been Varnished! you muppet (Thats me, not you)!

Engine Cowling:
I am going to go for a heat blasted rust.  Start with a base coat of C:Snake Bite Leather.  On the rear ring, Paint in C:Chainmail.  Add alternate layers of CW: Asuriman Blue and CW:  Ball Red  across the whole engine cowl.  When it starts looking right, wash with thined AOC: Burnt umber and AOC: Black.

Exterior Weathering:
Thin AOC: Burnt umber and wash it into the details. This adds depth to the detail.
Spray VMA: Dark Yellow onto the areas heat damaged by the engine exaust and Laz cannon mounts.  The Dark Yellow is thinned with Model Air thinners 2:1 instead of the usual 3:1.
Spray VMA: Black onto the center of the areas heat damaged by the engine exaust.  The Black is thinned with Model Air thinners 2:1 instead of the usual 3:1.


The Cockpit Interior
Using this tutorial link as as a guide

Base Coat: Black Grey
Panel Lines/ Stains thinned Black /Brown Mix sprayed
Further Panel line definition by Oil wash of Black/brown
Detailing: Lead pencil to highlight the edges of crew contact areas with a metailic tinge
Orange  plastic control surfaces

The Crew:
The crew will be wearing a tan uniform (VMC: Khaki) and green armour plates (VMC: Luftwaffe cam green) with with a white helmet.


For all Vallejo Model Air thin all paints 3 drops colour: 1 Drop Thinner Unless otherwise specified.


Tutorial Index
From Testors Scale Workshop
Full list of Testors Tutorials

Part 1: Introduction
Part 2: Introduction: Tools
Part 3: Introduction: Aribrush
Part 4a: Introduction: Painting
Part 4b:  Painting Techniques: BF109 Preshading
Apply a Body Colour to top and sides
Apply an Upper surface Colour
Apply the lower surface Colour
Part 5: Painting Techniques: BF109 Masking
Part 6: Painting Techniques: BF109 Masking Techniques and Mottling
Part 7: Decal Tools and Techniques
Part 8: Compare to Real Thing
Part 9: Panel Line Washes

Interiors: Part 1
Interiors: Part 2

Post Shading: Part 1
Post Shading: Part 2



Chipping  and exaust stains

Applying a Flat Coat to a scale model  

Applying Future to Clear plastic Parts

Final Report

Building a Flying Stand

Key
VMA: Vallejo Model Air
VMC: Vallejo Model Colour
VGC:  Vallejo Game Colour
C: Citadael
AOC: Windsor Newton Artists Oil Colour
CW: Citadel Wash